ARMASIL GT – Primer for silicone renders
Primer for silicone renders
Coloured product based on acrylic dispersion with the addition of silicone hydrophobising agents intended for proper preparation of the substrate for ARMASIL T and ARMASIL T AKORD silicone renders. Suitable for priming of all typical construction substrates outside buildings and coats in KABE THERM RENO*, KABE THERM AKORD, KABE THERM ELASTO and KABE THERM MW* EWI systems and in the ARMASIL RSA RENOVATION SYSTEM. To be applied on mineral substrates (such as concrete, cement render, cement-lime render) and on substrates covered with well set and bound polymer-based coatings.
– Improves the top coat adhesion
– Reduces and equalises substrate water absorption
– Assures high vapour permeability
– Makes render application and texture modelling easier
– Reduces the effect of substrate showing if it is coloured to the render colour
– Features a very high adhesion to both mineral substrates and polymer coatings
– Limits the possibility of algae and fungi growth;
Base binder: silicone and acrylic binder;
Pigments: non-organic coloured pigments;
The content of volatile organic compounds VOC: cat. A/g. The product contains less than 30 g/l VOC;
Density: ca. 1.30 g/cm³;
Colour: white or coloured to the render colour;
Solids content: ca. 44%;
Average coverage: ca. 0.20 l/m² (depending on the substrate water absorption);
Temperature of application (air and substrate): from +5°C to +25°C;
Relative humidity: ≤ 75%.
Packaging: Single-use plastic packaging of 5 and 10 l.
Storage: The product should be stored in its sealed packaging in cool condition but protected from frost. Opened packaging should be tightly closed and used as quickly as possible.
Shelf life: Originally sealed products have a 12-month shelf life from the date of production (this is printed on the side of the packaging).