NOVALIT GT – Primer for polysilicate renders
Primer for polysilicate renders
Coloured product based on low-alkali polysilicates and copolymer binder intended for proper preparation of the substrate for NOVALIT T and NOVALIT T AKORD polysilicate renders. Suitabe for priming of all typical construction substrates outside buildings and reinforcing coats in KABE THERM RENO, KABE THERM AKORD, KABE THERM AVANT and KABE THERM MW* EWI systems and in NOVALIT RSA anti-cracking system. To be applied on mineral substrates (such as concrete, lime render, cement-lime render and cement render) and on substrates covered with well set and bound polymer-based coatings.
– Improves the top coat adhesion
– Reduces and equalises substrate water absorption
– Assures high vapour permeability
– Reduces the effect of substrate showing if it is coloured to the render colour
– Makes render application and texture modelling easier
– Features a very high adhesion to both mineral substrates and polymer coatings
– Limits the possibility of algae and fungi growth
Base binder: special modified potassium water glass and copolymer binder;
Pigments: non-organic coloured pigments;
The content of volatile organic compounds VOC: cat. A/h. The product contains less than 30 g/l VOC;
Density: ca. 1.3 g/cm³;
Content of solids: min. 44%;
Colour: white or coloured to the render colour;
Average coverage: ca. 0.20 l/m² (depending on the substrate water absorption);
Temperature of application (air and substrate): from +5°C to +25°C;
Relative humidity: ≤75%.
Packaging: Single-use plastic packaging of 5 and 10 l.
Storage: The product should be stored in its sealed packaging in a cool, but frost-protected room. Opened packaging should be tightly closed and used as quickly as possible.
Shelf life: Originally sealed products have a 12-month shelf life from the date of production (this is printed on the side of the packaging).