KOMBI TABLE – Fast-setting moulding mortar for making drawn profiles on a moulding table
A fast-setting moulding mortar for making drawn profiles on a moulding table
KOMBI TABLE is a fast-setting mortar used to make single-layer drawn profiles on a moulding table or with thin layers on existing profiles. The mortar is suitable both for inside and outside applications.
Main advantages
• Fast setting
• Hydrophobic
• Easy to apply and process
• Reinforced with microfibres – limited shrinkage and tensions during drying
Composition: mix of cements, mineral fillers and modifiers
Temperature of application (air and substrate): from +5°C to +30°C
Colour: beige.
Grain size: up to 0.5 mm
After adding water the product must be used within: approx. 20 minutes.
Setting time: ca. 2 hours (at an air temp. 20°C, RH 65%)
Note: Do not reuse dried mortar by adding water or mix with fresh mortar.
Mixing ratio: ca. 5.5 l of water per 25 kg of dry mortar
Gross dry density of hardened mortar: ca. 1 550 kg/m3
Range of compressive strength: CS IV;
Adhesion to substrate: ≥0.2 N/mm2;
Water absorption due to capillary action: cat. Wc0;
Water vapour permeability coefficient: μ ≤ 13
Packaging: Disposable paper packaging containing 25 kg of the product.
Storage: The product should be stored in its original sealed packaging , in dry rooms, on palettes, at a temperature ranging from +5°C to +25°C. Protect against moisture.
Shelf life: 6 months from the date of manufacture provided on packaging.