ARMASIL F

Reference documents

ARMASIL F - TDS

Related technologies

Matt paint intended for performing decorative-protective paint coatings on the external facade of buildings, including KABE THERM RENO, KABE THERM SM and KABE THERM SM RENO, KABE THERM ELASTO, KABE THERM AVANT EWI systems based on EPS and KABE THERM MW, KABE THERM IN MW EWI systems based on mineral wool. It is especially recommended for the renovation painting of surfaces exposed to aggressive atmospheric conditions and requiring high dirt resistance. To be applied both on mineral substrates (such as concrete, traditional cement renders, cement-lime renders and thin coat mineral renders) and substrates coated with a polymer-based paint coating. It makes up a coating of high vapour permeability and low surface absorption. After wetting the silicone coating, the effect of water particle repelling ’may be observed on its surface. This effect sufficiently protects the facade against precipitation and significantly reduces dirt. Prior to paint application, absorbent substrate should be primed with HYDROPOR.

• Top resistance to adverse atmospheric conditions
• Very high vapour permeability
• High dirt resistance
• Low surface absorption
• High coverage
• To be applied on both mineral substrates and polymer coated surfaces
• Protected against algae and fungi growth

Base binder: silicone binder;
Pigments: resistant to UV radiation and atmospheric conditions non-organic coloured pigments;
The content of volatile organic compounds VOC: cat. A/c. The product contains less than 40 g / l VOC;
Density: ca. 1.50 g/cm³;
Colours: natural white, colours from the KABE colour chart and selected NCS colours (can be obtained by adding non-organic pigments);
Gloss level: matt;
Diluent: water;
Average coverage: ca. 0.33 l/m² (with double painting on a smooth substrate);
Temperature of application (air and substrate): from +5°C to +25°C;
Relative humidity: ≤ 75%;
Relative diffusion resistance of the layer with a thickness of 150 μm
Sd = 0.05 m (standard requirement Sd ≤2.0 m);
Surface absorption coefficient: w = 0.08 kg/m² • h0,5 (standard requirement w ≤ 0.5 kg/m² • h0.5).
Packaging: Single-use plastic packaging of 5 and 10 l.
Storage: The product should be stored in its original sealed packaging in a cool, but frostprotected room. Opened packaging should be tightly closed and used as quickly as possible.
Shelf life: Originally sealed products have a 18-month shelf life from the date of production (this is printed on the side of the packaging).