KOMBI STONE
A coarse-grain moulding mortar for making drawn facade mouldings
KOMBI STONE - TDSA coarse-grain, fast-setting mortar for making mouldings, cornices, rustication and bossages on the facade. The mortar is intended for internal and external applications. Note: The KOMBI STONE motar is not suitable for use in mouduling work on EWI systems. In such applications EPS profiles should be used. KOMBI STONE does not include components inducing chloride corrosion.
Product advantages
• Fast setting
• Hydrophobic
• Easy to apply and process
• Reinforced with microfibres – limited shrinkage and tensions during drying
Technical specification
Composition: mix of cements, mineral fillers and modifiers
Temperature of application (air and substrate): from +5°C to +30°C
Colour: beige.
Grain size: up to 1.2 mm
After adding water the product must be used within: approx. 20 minutes.
Setting time: ca. 2 hours (at an air temp. 20°C, RH 65%) Note: Do not reuse
dried mortar by adding water or mix with fresh mortar.
Mixing ratio: ca. 5.0 l of water per 25 kg of dry mortar
Gross dry density of hardened mortar: ca. 1 570 kg/m3
Range of compressive strength: CS IV;
Adhesion to substrate: ≥ 0.3 N/mm2;
Water absorption due to capillary action for 24 h: ≤ 0.9 kg/m2;
Water vapour permeability coefficient μ: ≤ 34
Packaging: Disposable paper packaging containing 25 kg of the product.
Storage: The product should be stored in its original sealed packaging , in dry rooms, on palettes, at a temperature ranging from +5°C to +25°C. Protect against moisture.
Shelf life: 6 months from the date of manufacture provided on packaging.