MINERALIT RESTAURO MWSK
Micro-mortar for filling gaps and caverns
Mineral injection mortar with very fine graining and high strength to fill holes, scratches and voids (i.e. caverns) in walls. The product after mixing with water makes a liquid and easily pumpable mixture with a rapid increase in strength and high final strength. The material is used in performing masonry injections.
Product advantages
• No shrinkage crack
• High compressive strength
• Very good flow and penetration into the gap
• No sedimentation
Technical specification
Base binder: portland cement, modifiers
Mixing proportions: ca. 6.8 l per 20 kg bag
Efficiency: from one product packaging, after adding the right amount of water, we get about 14.5 l of ready to use product
Temperature of application (air and substrate): from +5°C to +25°C;
Shelf life: 12 months from the production date indicated on the packaging.
Protect against moisture:
Flexural strength of hardened mortar after 7 days of ripening – 4.8 [N/mm2]
Flexural strength of hardened mortar after 28 days of ripening – 7.8 [N/mm2]
Compressive strength of hardened mortar after 7 days of ripening – 23.3 [N/mm2]
Compressive strength of hardened mortar after 28 days of ripening – 33.6 [N/mm2]
Water absorption coefficient caused by capillary action of hardened mortar after 24h – 0.15 [kg/m2]
Modulus of elasticity E – 10.0 [GPa]
Packaging: disposable paper packaging containing 20 kg of the product
Storage: Store in originally closed packages, in dry rooms, on pallets at a temperature of +5°C to +25°C