NOVALIT F

Mineral topcoat paint based on specially modified potassium water glass intended for performing decorative-protective paint coatings outside buildings, including, KABE THERM SM, KABE THERM SM RENO and KABE THERM AVANT EWI systems based on EPS and KABE THERM MW, KABE THERM IN MW and KABE THERM SG EWI systems based on mineral wool. It is especially recommended for primary and renovation painting of mineral substrates (such as traditional lime renders, cement-lime renders and cement renders as well as thin coat mineral renders, silicate renders, polysilicate renders) and for the renovation painting of substrates with synthetic-based paint coatings when mineral paint coating is required. The polysilicate paint shows an essentially reduced alkalinity (at the level of acrylic products) thanks to which the impact of atmospheric conditions on the quality of created paint coating has been significantly reduced.
Absorbent mineral substrates, prior to paint application require priming with NOVALIT GF.

Product advantages

 • Mineral character
• Low-alkali reaction (pH 8÷9.5)
• Resistance to adverse atmospheric conditions
• Increased resistance to changes of atmospheric
conditions during application and setting
• High dirt resistance
• Micro-porous texture which assures high vapour permeability
• Low surface absorption
• To be applied on both mineral substrates and polymer coated surfaces
• Protected against algae and fungi growth

Technical specification

 

Base binder: special modified potassium water glass;
Pigments: resistant to UV radiation and atmospheric conditions non-organic coloured colour pigments;
The content of volatile organic compounds VOC: cat. A/c. The product contains less than 40 g / l VOC;
Density: ca. 1.50 g/cm³;
Colours: natural white, colours from the KABE colour chart and selected NCS colours or samples provided (can be obtained by adding non-organic pigments);
Gloss level: matt;
Diluent: water;
Average coverage: ca. 0.33 l/m² (with double painting on a smooth substrate);
Temperature of application (air and substrate): from +5°C to +25°C;
Relative humidity: ≤ 75%;
Relative diffusion resistance of a layer with the thickness of 150 μm:
Sd = 0.04 m (standard requirement Sd ≤ 2.0 m);
Surface absorption coefficient: w = 0.05 kg/m² • h 0.5 (standard requirement w ≤ 0.5 kg/m² • h 0.5).
Packaging: Single-use plastic packaging of 5 and 10 l.
Storage: The product should be stored in its sealed packaging in a cool, but frost-protected room. Opened packaging should be tightly closed and used as quickly as possible.
Shelf life: Originally sealed products have a 12-month shelf life from the date of production (this is printed on the side of the packaging).